Q-6 Power2 Amplifier
$Call for Pricing
|
Soundsphere’s Model Q-6 Power2 speakers add onboard amplification to the compact Model Q-6 broad coverage speakers, making a separate amplifier unnecessary. Designed specifically for applications where only a single wide dispersion speaker is required for coverage, the Power2 provides an easier and less expensive installation in such areas as small warehouses, open-ceiling classrooms or lecture halls with video projectors; board rooms; and small retail stores
The amplifier has been designed to mount to the rear of the reflector. Two electronically balanced inputs with level controls are provided. The Power2 amplifier also includes a master output level control.
| Q-6 Power2 Features: |
- Two Electronically Balanced Inputs
- Level Control for Each Input
- Master Level Control
|
Q-6 Power2 Specifications:
|
| Power Output at 4 Ohms: |
30 Watts RMS |
 |
| Input Impedance: |
20K Ohms |
|
| THD+N 1kHz @ 30W RMS: |
≤ 0.4% |
|
| Gain: |
20dB |
|
| Input Sensitivity for 30W RMS Output: |
1.0 VRMS |
|
| Protection: |
Speaker short
Speaker lead short to ground
Overcurrent
Thermal
Power supply polarity |
|
Maximum SPL @ 30 WRMS:
|
103dB SPL @ 1m
|
Q-6 Power2 Diagram:
|
|
|
|
Q-CS is a compact, omnidirectional loudspeaker designed for flush mounting in 8 to 14 ft. finished ceilings. The hemispherical coverage pattern creates a smoother sound field with fewer units than a system of conventional speakers. The Q-CS produces both clear voice announcements and full range music reproduction, even at background levels.
The Q-CS100 is designed for finished ceiling applications where clear voice announcements, musice clarity, good intelligibility and high fidelity music at high sound pressure levels are required.
The Q-CS Power1 is a compact powered loudspeaker with a built in 15W amplifier. Designed for low finished ceiling installations requiring clear voice announcements and full-range music reproduction, even at background levels. Full frequency sound and particularly broad coverage, with direct connection to video projectors and computers with no additional equipment needed.
Soundsphere 110B loudspeaker was designed to provide clear voice announcements, seamless background music and even, omnidirectional coverage. The Model 110B is a compact, unobtrusive speaker that is just 10 in. in diameter and offers fast distributed system installation.
The Q-6 is a compact weatherproof loudspeaker, offering omnidirectional full-range music and clear voice announcements for both indoor and outdoor installations. The Q-6 reproduces a wide field-of-sound that appears to come from everywhere. Spherical-design offers the ability to conceal speaker wires and support/safety cables which provids a streamline appearance. With an increased Sound Pressure Level (SPL) of 103dB, the Q-6 is an ideal solution for outdoor venues.
Q-8 is a high power, robust loudspeaker, offering greater sensitivity and power-handling capability. Designed to provide clear paging, voice announcements and high-fidelity foreground and background music in single or distributed systems. A single unit provides a cost effective, high performance system.
Q-12A omnidirectional loudspeaker provides a more powerful sound system where clear voice announcements and high-fidelity foreground music at high sound pressure levels are required. Ideal speaker for noisier indoor applications. Also available in a weatherproof configuration for outdoor use, featuring a protective screen over the holes and driver to prevent birds from nesting in the speaker. Clear paging in single, multiple or distributed speaker systems.
The Q-15 loudspeaker is designed to offer accurate, full-range voice announcements and high-fidelity music reproduction.
The Q-LB is a bass supplement for enhanced low frequency performance in model Q-6 loudspeaker systesm.
The Q-SB2 is Soundsphere’s largest loudspeaker, designed for installations requiring enhanced low-frequency response at high sound pressure levels. For use in Q-12A loudspeaker systems
Includes TWO Model Q-12A loudspeakers and BK2 Boom Kit.
Includes TWO Model Q-12A loudspeakers, ONE Q-SB2 subwoofer and BK3 Boom Kit.
Includes FOUR Model Q-12A loudspeakers and BK4 Boom Kit.
Includes FOUR Model Q-12A loudspeakers, ONE Q-SB2 subwoofer and BK5 Boom Kit.
BK2 bracket and TWO Model Q-15 loudspeakers.
BK4 bracket and FOUR Model Q-15 loudspeakers.
FOUR Q-6 loudspeakers, ONE Q-LB bass supplement speaker and ONE Q-CX electronic crossover. The package provides full frequency sound with extended bass for use in high end distributed systems, in spaces such as exercise clubs, sports bars and retial stores.
