Anchor Audio | D.A.S. Audio | Soundsphere Loudspeakers | Request Info

Send us your
CAD Drawings or
Blueprints
of your project
Email or Snail Mail

RF 215.96 Reference Speakers

List Price$2494 Our Price$1699

This passive/active two-way system for fixed or portable sound reinforcement systems has an internal crossover network with rear located mode selector switch. Two 15G low frequency transducers with 4 in. coils and "double spider" suspension reproduce bass and an ND-10 compression driver with neodymium magnet structure and 4 in. voice coil handles the high frequencies. Two rear located wheels and steel-reinforced handles facilitate manoeuvring and 12 M10 rigging points permit the cabinets to be flown safely. 2 way vented loudspeaker system 2 x 15 in. cone speaker 1.5 in. compression driver with constant directivity horn 1400 W power handling Twin 15G Hi-power woofers with 4 in. voice coil ND-10 Neodymium driver with 4 in. titanium diaphragm Passive or Bi-amp operation 12 M10 rigging points Painted in durable Isoflex paint Rear located wheels for ease of transport View Full Line of Reference Series Speakers HiRes Image  Tech Data  Catalog  User Manual  Related Items  Print SPECIFICATIONS RMS Power Handling Passive: 1400 W LF: 1400 W HF: 200 W Peak Power Handling Passive: 5600 W LF: 5600 W HF: 800 W Frequency Range (-10 dB) 37 Hz – 20 kHz On-Axis Sensitivity 1 W/1 m LF: 102 dB SPL, HF: 101 dB SPL Dispersion 90°H x 60°V Nominal Impedance Pasive: 4 ohms LF: 4 ohms HF: 8 ohms Enclosure Material Birch Plywood Color / Finish Black / Paint Connectors 2 x NL4 Speakon Dimensions (H x W x D) 47.2 x 21 x 19.1 in Weight 137.5 lbs

This passive full-range, two-way system comprises two 15 inch cone woofers with a four inch voice coil. The high frequency section comprises a large format compression driver with a four inch titanium diaphragm and neodymium magnet, coupled to a 90° x 60° horn. It comprises an injection molded aluminum chassis. It includes a transformer to select passive or bi-amplified mode.

A typical production unit has the following specifications:

Average (RMS) power handling (based on a two-hour test using a 6 dB crest factor pink noise signal band-limited according to IEC standards) is rated at 1400 W (passive mode), LF: 1400W and HF: 200W (bi-amplified mode). On-axis (IEC) frequency range is 37 Hz to 20 kHz (-10 dB). On-axis sensitivity (1W /1m) is 102 dB SPL in LF and 101 dB SPL in HF. Coverage angles are 90 degrees horizontal and 60 degrees vertical (average one-third octave band of 500 Hz to 8 kHz). Nominal impedance is 4 ohms for LF and 8 ohms for HF.

The subwoofer unit is mounted in direct radiation configuration inside a bass-reflex trapezoidal cabinet using 18mm Birch plywood. The unit is painted with catalyzed polyurethane paint and finished with an Isoflex coating. The front is protected by a steel grille, coated with a corrosion-resistant polyamide film. The system includes 12 M10 rigging points situated on the top, underneath and on either side of the enclosure. Two handles and two rear transportation wheels are also provided.

The system shall be a D.A.S. RF-215.96 system.

RELATED ITEMS
Flying
	ANL-2 Rigging Kit With 4 Eyebolts + 4 Carabiners. $42
REPLACEMENT PARTS (click image to enlarge)
	GM-K-8H HIGH Replacement diaphragm for compression drivers. $165
	GM-15G LOW Complete recone kit for cone loudspeakers. $124