Powered Systems

Passive Systems

Electronics

Accessories

Speakers

Drivers

Horns

Replacement Parts

Installations

Free Quote
Send us your
CAD Drawings or
Blueprints
of your project
Email or Snail Mail


DAS Audio Sound Systems



Previous Page
RF 215.85 Reference Speakers  
RF 215.85 Speakers
$1,363.00

Add to Cart
The RF-215.85 is a passive, two-way full-range system that incorporates dual 15 in. low frequency transducers with aluminum chassis. A 1 in. M-50 compression driver with 2 in. titanium diaphragm and rotatable 80° x 50° horn reproduce high frequencies. Two steel-reinforced handles make handling easier and 12 M10 rigging points permit the cabinets to be flown safely.
  • 2 way vented loudspeaker system
  • 2 x 15 in. cone speaker
  • 1 in. compression driver with constant directivity horn
  • 800 W power handling
  • Twin 15P woofer with 3 in. voice coil
  • M-50 driver with 2 in. titanium diaphragm
  • New rotatable 80° x 50 ° horn design
  • 12 M10 rigging points
  • View Full Line of Reference Series Speakers
RF 215.85 High Res Image Hi Res Image | RF 215.85 Technical Data Sheet Tech Data | Reference Series Product Catalog Product Catalog | RF 215.85 User Manual User Manual | RF 215.85 Related Items Related Items | Print RF 215.85 Series PagePrint Page


SPECIFICATIONS
Frequency Range (-10 dB) 45 Hz – 20 kHz
Program Power Capacity 1600 W
On-Axis Sensitivity 1 W/1 m 101 dB SPL
Dispersion 80°H x 50°V Rotatable
Impedance 4 Ω
Enclosure Material Birch Plywood
Dimensions (H x W x D) 44.1 x 18.7 x 17.7 in
Weight 96.8 lbs

This passive full-range, two-way system comprises two 15 inch cone woofers with a three inch voice coil. The high frequency section comprises a small format compression driver with a two inch titanium diaphragm and ASC protection circuitry, coupled to an 80° x 50° rotatable horn. It comprises an injection molded aluminum chassis.

A typical production unit has the following specifications:

Average (RMS) power handling (based on a two-hour test using a 6 dB crest factor pink noise signal band-limited according to IEC standards) is rated at 800 W. On-axis (IEC) frequency range is 45 Hz to 20 kHz (-10 dB). On-axis sensitivity (1W / 1m) is 101 dB SPL. Coverage angles are 80 degrees horizontal and 50 degrees vertical (average one-third octave band of 500 Hz to 8 kHz). Nominal impedance is 4 ohms.

The subwoofer unit is mounted in direct radiation configuration inside a bass-reflex trapezoidal cabinet using 18mm Birch plywood. The unit is painted black. The front is protected by a steel grille, coated with a corrosion-resistant polyamide film. The system includes 12 M10 rigging points situated on the top, underneath and on either side of the enclosure. Two handles are also provided.

The system shall be a D.A.S. RF-215.85 system.

RELATED ITEMS
ANL-2 ANL-2
Rigging Kit With 4 Eyebolts + 4 Carabiners.

$40.00

Add to Cart


Back to Top