D.A.S. Audio RF 15.85 Reference Series Speakers

RF 15.85 Reference Speakers

List Price$964
Our Price$660

The RF-15.85 is a passive, two-way system for fixed or portable sound reinforcement systems. Bass frequencies are reproduced by a 15P low frequency transducer with aluminum chassis. High frequency reproduction is handled by an M-30 compression driver with 2 in. titanium diaphragm. The driver is coupled to a rotatable 80° x 50° horn. The cabinet is equipped with a standard pole-mount socket and two steel-reinforced handles. 12 M10 rigging points and an extensive range of mounting accessories allows for use in permanent installations.

2 way vented loudspeaker system

15 in. cone speaker

1 in. compression driver with constant directivity horn

400 W power handling

15P woofer with 3 in. voice coil

M-30 compression driver with 2 in. titanium diaphragm

New rotatable 80° x 50 ° horn design

Stand and pole mountable

L-Bracket accessory for permanent mounting

Array frame accessory for 2 and 3 units

Truss mounting accessory for rigging from truss

View Full Line of Reference Series Speakers

HiRes Image Tech Data Catalog User Manual Related Items Print

SPECIFICATIONS

RMS Power Handling 400 W

Peak Power Handling 1600 W

Frequency Range (-10 dB) 50 Hz – 20 kHz

On-Axis Sensitivity 1 W/1 m 99 dB SPL

Dispersion 80°H x 50°V Rotatable

Rated Peak SPL at 1 m 131 dB

Nominal Impedance 8 Ω

Enclosure Material Birch Plywood

Color / Finish Black / Paint

Connectors 2 x NL4 Speakon

Dimensions (H x W x D) 28.7 x 16.4 x 16.3 in

Weight 57.2 lbs

This passive full-range, two-way system comprises a single 15 inch cone woofer with a three inch voice coil. The high frequency section comprises a small format compression driver with a two inch titanium diaphragm and ASC protection circuitry, coupled to an 80° x 50° rotatable horn. It comprises an injection molded aluminum chassis and a tripod socket. Accessories include an "L" bracket for fixed installations, an array frame for creating two and three unit clusters and a truss mounting bracket.

A typical production unit has the following specifications:

Average (RMS) power handling (based on a two-hour test using a 6 dB crest factor pink noise signal band-limited according to IEC standards) is rated at 400 W. On-axis (IEC) frequency range is 50 Hz to 20 kHz (-10 dB). On-axis sensitivity (1W / 1m) is 99 dB SPL. Coverage angles are 80 degrees horizontal and 50 degrees vertical (average one-third octave band of 500 Hz to 8 kHz). Nominal impedance is 8 ohms.

The subwoofer unit is mounted in direct radiation configuration inside a bass-reflex trapezoidal cabinet using 18mm Birch plywood. The unit is painted black. The front is protected by a steel grille, coated with a corrosion-resistant polyamide film. The system includes 12 M10 rigging points situated on the top, underneath and on either side of the enclosure. Two handles are also provided.

The system shall be a D.A.S. RF-15.85 system.

RELATED ITEMS
Flying
	ANL-2 Rigging Kit With 4 Eyebolts + 4 Carabiners. $42
	AXA-2RF15V Array frame kit for rigging 2 Rf-15.85 or 2 Rf-15.64 in a vertical array. $147
	AXA-3RF15 Array frame kit for rigging for 3 Rf-15 in a horizontal array. $252
	AX-TRUSS C-clamp for truss mounting. $189
Mounting
	TRD-2 Speaker Stand for 35 mm pole mount sockets. $142
	TRD-4 Pole Mount for Sub. $12
	AXU-RF15 "U" bracket wall / ceiling / truss (truss mounting requires AXC-AT) Call for Pricing.
REPLACEMENT PARTS (click image to enlarge)
	GM-M-50 HIGH Replacement diaphragm for compression drivers. $80
	GM-15P LOW Complete recone kit for cone loudspeakers. $83


Sound Audio Systems is a division of Signature Ventures