Anchor Audio | D.A.S. Audio | Soundsphere Loudspeakers | Request Info

Send us your
CAD Drawings or
Blueprints
of your project
Email or Snail Mail

RF 12.64 Reference Speakers

List Price$1212 Our Price$820

The RF-12.64 is a high performance passive two-way system for fixed or portable sound reinforcement applications. A 12H low frequency transducer with 4 in. voice coil handles bass reinforcement. High frequencies are reproduced by an M-10N compression driver with neodymium magnet structure and 3 in. voice coil attached to a 60° x 40° rotatable horn. A standard pole-mount socket permits tripod mounting and two steel-reinforced handles facilitate handling. 12 M10 rigging points and an extensive range of mounting accessories allows for use in permanent installations. 2 way vented loudspeaker system 12 in. cone speaker 1.5 in. compression driver with constant directivity horn 600 W power handling 12H Hi-power woofer with 4 in. voice coil M-10N Neodymium driver with 3 in. titanium diaphragm New rotatable 60° x 40 ° horn design Stand and pole mountable L-Bracket accessory for permanent mounting Array frame accessory for 2 and 3 units Truss mounting accessory for rigging from truss View Full Line of Reference Series Speakers HiRes Image  Tech Data  Catalog  User Manual  Related Items  Print SPECIFICATIONS RMS Power Handling 600 W Peak Power Handling 2400 W Frequency Range (-10 dB) 50 Hz – 20 kHz On-Axis Sensitivity 1 W/1 m 97 dB SPL Rated Peak SPL at 1 m 131 dB Dispersion 60°H x 40°V Rotatable Nominal Impedance 8 Ω Enclosure Material Birch Plywood Color / Finish Black / Paint Connectors 2 x NL4 Speakon Dimensions (H x W x D) 25.4 x 14.6 x 13.6 in Weight 55 lbs

This passive full-range, two-way system comprises a single 12 inch cone woofer with a four inch voice coil. The high frequency section comprises a medium format compression driver with a three inch titanium diaphragm and neodymium magnet, coupled to a 60° x 40° rotatable horn. It comprises an injection molded aluminum chassis and a tripod socket. Accessories include an "L" bracket for fixed installations, an array frame for creating two and three unit clusters and a truss mounting bracket.

A typical production unit has the following specifications:

Average (RMS) power handling (based on a two-hour test using a 6 dB crest factor pink noise signal band-limited according to IEC standards) is rated at 600 W. On-axis (IEC) frequency range is 50 Hz to 20 kHz (-10 dB). On-axis sensitivity (1W / 1m) is 97 dB SPL. Coverage angles are 60 degrees horizontal and 40 degrees vertical (average one-third octave band of 500 Hz to 8 kHz). Nominal impedance is 8 ohms.

The subwoofer unit is mounted in direct radiation configuration inside a bass-reflex trapezoidal cabinet using 18mm Birch plywood. The unit is painted black. The front is protected by a steel grille, coated with a corrosion-resistant polyamide film. The system includes 12 M10 rigging points situated on the top, underneath and on either side of the enclosure. Two handles are also provided.

The system shall be a D.A.S. RF-12.64 system.

RELATED ITEMS
Flying
	ANL-2 Rigging Kit With 4 Eyebolts + 4 Carabiners. $42
	AXA-2RF12V Array frame kit for rigging 2 Rf-12.85 or 2 Rf-12.64 in a vertical array. $126
	AXA-3RF12 Array frame kit for rigging 3 Rf-12 in a horizontal array. $231
	AX-TRUSS C-clamp for truss mounting. $189
Mounting
	TRD-2 Speaker Stand for 35 mm pole mount sockets. $142
	TRD-4 Pole Mount for Sub. $12
	AXU-RF12 "U" bracket wall / ceiling / truss (truss mounting requires AXC-AT). Call for Pricing.
REPLACEMENT PARTS (click image to enlarge)
	GM-M-10 HIGH Replacement diaphragm for compression drivers. $125
	GM-12G LOW Complete recone kit for cone loudspeakers. $120