D.A.S. Audio RF 12.64 Reference Series Speakers

RF 12.64 Reference Speakers

$1,212.00

The RF-12.64 is a high performance passive two-way system for fixed or portable sound reinforcement applications. A 12H low frequency transducer with 4 in. voice coil handles bass reinforcement. High frequencies are reproduced by an M-10N compression driver with neodymium magnet structure and 3 in. voice coil attached to a 60° x 40° rotatable horn. A standard pole-mount socket permits tripod mounting and two steel-reinforced handles facilitate handling. 12 M10 rigging points and an extensive range of mounting accessories allows for use in permanent installations.

2 way vented loudspeaker system

12 in. cone speaker

1.5 in. compression driver with constant directivity horn

600 W power handling

12H Hi-power woofer with 4 in. voice coil

M-10N Neodymium driver with 3 in. titanium diaphragm

New rotatable 60° x 40 ° horn design

Stand and pole mountable

L-Bracket accessory for permanent mounting

Array frame accessory for 2 and 3 units

Truss mounting accessory for rigging from truss

View Full Line of Reference Series Speakers

Hi Res Image | Tech Data | Product Catalog | User Manual | Related Items | Print Page

SPECIFICATIONS

Frequency Range (-10 dB) 45 Hz – 20 kHz

Program Power Capacity 1600 W

On-Axis Sensitivity 1 W/1 m 101 dB SPL

Dispersion 80°H x 50°V Rotatable

Impedance 4 Ω

Enclosure Material Birch Plywood

Dimensions (H x W x D) 44.1 x 18.7 x 17.7 in

Weight 96.8 lbs

This passive full-range, two-way system comprises a single 12 inch cone woofer with a four inch voice coil. The high frequency section comprises a medium format compression driver with a three inch titanium diaphragm and neodymium magnet, coupled to a 60° x 40° rotatable horn. It comprises an injection molded aluminum chassis and a tripod socket. Accessories include an "L" bracket for fixed installations, an array frame for creating two and three unit clusters and a truss mounting bracket.

A typical production unit has the following specifications:

Average (RMS) power handling (based on a two-hour test using a 6 dB crest factor pink noise signal band-limited according to IEC standards) is rated at 600 W. On-axis (IEC) frequency range is 50 Hz to 20 kHz (-10 dB). On-axis sensitivity (1W / 1m) is 97 dB SPL. Coverage angles are 60 degrees horizontal and 40 degrees vertical (average one-third octave band of 500 Hz to 8 kHz). Nominal impedance is 8 ohms.

The subwoofer unit is mounted in direct radiation configuration inside a bass-reflex trapezoidal cabinet using 18mm Birch plywood. The unit is painted black. The front is protected by a steel grille, coated with a corrosion-resistant polyamide film. The system includes 12 M10 rigging points situated on the top, underneath and on either side of the enclosure. Two handles are also provided.

The system shall be a D.A.S. RF-12.64 system.

RELATED ITEMS
	TRD-4 Pole Mount for Sub. $11.00
	TRD-2 Tripod speaker stand - Aluminum. $136.00
	AX-L Ceiling or wall mount with 2 "L" brackets. $60.00
	ANL-2 Rigging Kit With 4 Eyebolts + 4 Carabiners. $40.00
	AX-TRUSS C-clamp for truss mounting. $180.00
	AXA-2RF12 Array fram kit for mounting 2 boxes vertical array. $100.00
	AXA-3RF12 Array fram kit for mounting 3 boxes vertical cluster. $220.00
	AXA-2RF15 Array fram kit for mounting 2 boxes vertical array. $120.00
	AXA-3RF15 Array fram kit for mounting 3 boxes vertical cluster. $240.00