D.A.S. Audio Pf 215 Series Loudspeakers

Pf 215 Portable / Live Sound Reinforcement Speakers

List Price$989
Our Price$792

2-way passive full range loudspeaker utilizes two 15" cone low frequency transducer and a 1" throat compression driver with titanium diaphragm. The trapezoidal cabinet is constructed of Complex Aggregate Board and finished with a hard-wearing grey carpet. Two bar handles and a steel grille sealed against corrosion using a polyamide powder coat finish are provided.

2-way vented loudspeaker system

2 in. x 15 in. speakers

1 in. compression driver with constant directivity horn

700 W power handling

Highly resistant CAB enclosure

View Full Line of Pf Series Speakers

Hi Res Image | Tech Data | Product Catalog | Print Page

SPECIFICATIONS

Frequency Range (-10 dB) 50 Hz – 20 kHz

Program Power Capacity 1400 W

On-Axis Sensitivity 1W/1 m 102 dB SPL

Dispersion 90°H x 40°V

Impedance 4 Ω

Dimensions (H x W x D) 41 in. x 18.7 in. x 15.2 in.

Weight 90.2 lbs

The 2-way passive full range loudspeaker shall incorporate two 15 inch cone low frequency transducers and a 1 inch throat compression driver mounted to a constant directivity horn. The frame of the low frequency speakers shall be manufactured of die-cast aluminium. The low frequency voice coil shall be 3 inches in diameter. The high frequency voice coil shall be 2 inches in diameter and the diaphragm shall be constructed of titanium.

The system specifications of a typical production unit shall be as follows: Nominal Average (RMS) power handling shall be 700W. On-axis frequency range shall be of 50 Hz to 20 kHz. On-axis sensitivity (1W / 1m) shall be 102 dB SPL. Coverage angles shall be 90 degrees horizontal and 40 degrees vertical (average of 1/3rd octave bands from 500 to 8 kHz). Nominal impedance shall be 4 ohms.

The system’s low frequency driver shall be mounted as direct radiator into a bass-reflex cabinet constructed of Complex Aggregate Board. The exterior finish shall be hardwearing grey carpet capable of acting as a moisture barrier. The cone loudspeakers shall be covered with a perforated steel grille, sealed against corrosion using a polyamide powder coat finish. Two bar handles shall be provided.

The system shall be a D.A.S. PF-215.