D.A.S. Audio ND-10 1.5 inch Drivers

ND-10 Driver

$635.00

250 W program HF compression driver
4 in. pure titanium diaphragm
1.5 in. exit
Neodymium magnetic structure
Self-centering precision diaphragm assembly
View Full Line of 1.5 inch Drivers
View Full Line of Drivers

Hi Res Image |

Tech Data |

Print Page

SPECIFICATIONS
Service	Compression Driver
Throat Geometry	1.5 in.
Program Power Capacity	250 W from 1 kHz
On-Axis Sensitivity 1 W / 1 m	111 dB SPL
Diaphragm Material	Titanium
Diaphragm Size	4 in. (100mm)
Magnet Material	Neodymium
Weight	9 lbs

The high frequency compression driver shall consist of a Neodymium magnet structure. The voice coil shall be 4 inches in diameter and manufactured of flat aluminium wire, and bonded to a Kapton former. The throat shall be 1.5 inches in diameter.

The specifications of a typical production unit shall be as follows: Average (RMS) Power Handling (1kHz - 20 kHz) shall be 125W. On-axis sensitivity (4 V / 1m) shall be 111 dB SPL with a horn of Q=11.6. Nominal impedance shall be 16 ohms. DC resistance shall be 8 ohms.