D.A.S. Audio Monitor 8 Series Studio Monitors

Monitor 8 Studio Monitor Speakers

$476.00

The Mid field reference monitor 8 is a 2-way passive full range studio monitor loudspeaker which incorporates an 8" low frequency transducer and a 0.75 inch aluminium dome high frequency transducer. The system's low frequency driver is mounted as a direct radiator in a bass-reflex cabinet constructed of MDF wood, with solid Iroko side panels. The tuning port is located at the rear to minimize turbulence noise and two M6 mounting points are located on the bottom panel of the enclosure. The acoustically transparent cloth grille system is detachable.

Mid-Field Reference Monitor

1 in. x 8 in. + Tweeter

250 Watts Program Power

116 dB Peak SPL

View Full Line of Monitor Series Speakers

Hi Res Image | Tech Data | Product Catalog | User Manual | Related Items | Print Page

SPECIFICATIONS

Frequency Range (-10 dB) 38 Hz – 33 kHz

Program Power Capacity 250 W

On-Axis Sensitivity 1W/1 m 89 dB SPL

Dispersion 120°H x 95°V

Impedance 8 Ω

Dimensions (H x W x D) 16.5 in. x 11 in. x 11.5 in.

Weight 28 lbs

The 2-way passive full range studio monitor loudspeaker shall incorporate a 8 inch cone low frequency transducer and a 1 inch aluminium dome high frequency transducer. The dome shall be protected by a fine mesh metal grille. The low frequency voice coil shall be 1.5 inches in diameter. The high frequency voice coil shall be 1 inch in diameter.

The system specifications of a typical production unit shall be as follows: Average (RMS) power handling (based on a two hour test using an IEC band-limited 6 dB crest factor pink noise signal) shall be 125W. On-axis frequency range shall be of 38 Hz to 33 kHz. On-axis sensitivity (1W / 1m) shall be 89 dB SPL. Nominal coverage angles shall be 120 degrees horizontal and 95 degrees vertical. Nominal impedance shall be 8 ohms.

The system’s low frequency driver shall be mounted as direct radiator into a bass-reflex cabinet constructed of MDF wood, except for the side panels, which shall utilise stripped Iroko wood. The tuning port shall be located at the back to minimise turbulence noise. Two M6 mounting points shall be provided on the bottom panel of the enclosure. The system shall provide a detachable acoustically transparent cloth grille.

The system shall be a D.A.S. MONITOR-8.

RELATED ITEMS
	AX-M Adjustable wall mount bracket. $87.00