D.A.S. Audio Mi 115 Series Passive Full Range Loudspeakers

Mi 115 Portable Sound Reinforcement Speakers

List Price$519
Our Price$415

This 2-way passive full range loudspeaker utilizes a 15" cone low frequency transducer and a 1" throat compression driver with titanium diaphragm. The multi-angle cabinet is constructed of Complex Aggregate Board and finished with a hard-wearing black carpet. Two bar handles and a steel grille sealed against corrosion using a polyamide powder coat finish are provided. A 35 mm tripod socket allows for stand mounting.

500 W Program Power

15 in. low frequency transducer with over-sized motor structure

1 in. compression driver with titanium diaphragm and EFW voice coil technology

Asymmetrical cabinet design for floor monitor use

Internal passive crossover network with ASC protection circuitry

Heavy-duty carpet finish with corner-guards

Standard pole-mount socket for use with tripod

Two steel-reinforced handles

View Full Line of Mi Series Speakers

Hi Res Image | Tech Data | Product Catalog | Related Items | Print Page

SPECIFICATIONS

Program Power Capacity 500 W

On-Axis Sensitivity 1W/1 m 99 dB SPL

Dispersion 90°H x 75°V

Impedance 8 Ω

Dimensions (H x W x D) 26.5 in. x 19 in. x 15.4 in.

Weight 50.6 lbs

The 2-way passive full range loudspeaker shall incorporate a 15 inch cone low frequency transducer and a 1 inch throat compression driver mounted to a constant directivity horn. The frame of the low frequency speakers shall be manufactured of die-cast aluminium. The low frequency voice coil shall be 2.5 inches in diameter. The high frequency voice coil shall be 2 inches in diameter and the diaphragm shall be constructed of titanium.

The system specifications of a typical production unit shall be as follows: Nominal Average (RMS) power handling shall be 250W. On-axis frequency range shall be of 50 Hz to 16 kHz. On-axis sensitivity (1W / 1m) shall be 99 dB SPL. Nominal impedance shall be 8 ohms.

The system’s low frequency driver shall be mounted as direct radiator into a bass-reflex multi-angle cabinet constructed of Complex Aggregate Board. The exterior finish shall be hardwearing grey carpet. The front of the system shall be covered with a perforated steel grille, sealed against corrosion using a polyamide powder coat finish. Two bar handles shall be provided. A 35 mm tripod socket shall be provided.

The system shall be a D.A.S. MI-115.

RELATED ITEMS
	TRD-2 Tripod speaker stand – Aluminum. $136.00