|
The H-2200 incorporates a high output energy design based on Class "H" intelligent power processing. The reduced AC draw and heat, variable speed fans and an optimized heat evacuation design offer greater output and reliability. An advanced protection management system including AC circuit breaker, overload, short circuit, thermal, load DC fault protection, distortion control with clip limiting, and on/off muting.
 Hi Res Image |  Product Catalog |  User Manual |  Print Page
| SPECIFICATIONS |
| EIA Power (1 kHz@DTH 1%) 8/4/2 Ω |
620 W/950 W |
| Power Bridged 8/4 Ω |
1900 W |
| Frequency Response |
20 Hz-20 kHz +0/-0.5 dB
5 Hz-48 kHz -3 dB |
| Signal/Noise (20 Hz-20 kHz) |
-99 dB |
| Distortion (SMPTE-IM) |
Less than 0.02% |
| Distortion (typical) 20 Hz-20 kHz |
Less than 0.05% |
| Damping Factor 8 Ω |
>310 |
| Input Sensitivity 4 Ω |
1.54 V |
| Input Impedance |
10 kohms Un-balanced
20 kohms Balanced |
| Voltage Gain |
32 dB (40x) |
| Output Circuitry |
H-2 |
| AC Requirements |
115, 230 VAC 50-60 Hz |
| Current Draw (1/3 Power 4 Ω/230V) |
8.7 A |
| Dimensions (H x W x D) |
3.5 x 19 x 15.9 in |
| Weight |
38.3 lbs |
|
