D.A.S. Audio Factor 8 Series Speakers

Factor 8

Black
$288.00

White
$288.00

The Factor-8 is a full-range system that houses an 8 in. low frequency transducer with a 1.5” voice coil. The high frequency unit is a 1” soft dome tweeter with a specially designed crossover network and wide dispersion characteristics similar to those of the Factor 5. Available in an outddor IP-54 version.

Two-Way, Music Monitor

1 in. x 8 in. + Tweeter

200 Watts Program Power

117 dB Peak SPL

View Full Line of Factor Series Speakers

Hi Res Image | Tech Data | Product Catalog | User Manual | Related Items | Print Page

SPECIFICATIONS

Frequency Range (-10 dB) 55 Hz – 24 kHz

Program Power Capacity 200 W

On-Axis Sensitivity 1W/1 m 91 dB SPL

Dispersion 145°H x 135°V

Impedance 8 Ω

Dimensions (H x W x D) 17.5 in. x 10.5 in. x 9 in.

Weight 16.5 lbs

The 2-way passive full range loudspeaker shall incorporate an 8 inch cone low frequency transducer and a 1 inch soft dome high frequency unit. The low frequency voice coil shall be 1.5 inches in diameter.

The system specifications of a typical production unit shall be as follows: Average (RMS) power handling (based on a two hour test using an IEC band-limited 6 dB crest factor pink noise signal) shall be 100W. IEC on-axis frequency range shall be of 55 Hz to 24 kHz. On-axis sensitivity (1W / 1m) shall be 91 dB SPL. Coverage angles shall be 145 degrees horizontal and 135 degrees vertical (average of 1/3rd octave bands from 500 to 10 kHz). Nominal impedance shall be 8 ohms.

The system’s low frequency driver shall be mounted as direct radiator into a bass-reflex cabinet constructed of polypropylene. Colour for the "W" version shall be white, otherwise colour shall be black. The front of the system shall be covered with a perforated steel grille, sealed against corrosion using a polyamide powder coat finish. A hand location shall be provided.

The system shall be a D.A.S. Factor 8/8W.