| Factor 5T Compact Monitor Speaker | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
For use in low voltage sound systems, a 60 W high efficiency multi-tap transformer is built into the Factor-5T. These models can be used in 50, 70 or 100 volt distributed systems and offer a 6-step impedance switch. Available in a outdoor IP-54 version. |
|||||||||||||||||||
The 2-way passive full range loudspeaker shall incorporate a 5 inch cone low frequency transducer and a 1 inch soft dome high frequency unit. The low frequency voice coil shall be 1 inch in diameter.
The system specifications of a typical production unit shall be as follows: Average (RMS) power handling (based on a two hour test using an IEC band-limited 6 dB crest factor pink noise signal) shall be 80W. IEC on-axis frequency range shall be of 80 Hz to 21 kHz. On-axis sensitivity (1W / 1m) shall be 90 dB SPL. Coverage angles shall be 140 degrees horizontal and 120 degrees vertical (average of 1/3rd octave bands from 500 to 10 kHz). Nominal impedance shall be 8 ohms. The system shall incorporate a 60W multi-tap isolation input transformer with switch positions for power settings ranging from at least 3.7W to 60W in 3 dB steps for 70 or 100V lines.
The system’s low frequency driver shall be mounted as direct radiator into a bass-reflex rectangular cabinet constructed of polypropylene. Colour for the "W" version shall be white, otherwise colour shall be black. The front of the system shall be covered with a perforated steel grille, sealed against corrosion using a polyamide powder coat finish.
The system shall be a D.A.S. Factor 5T/5TW.
| RELATED ITEMS | |||
|---|---|---|---|
![]() |
AX-5 Adjustable Wall / Ceiling Mount Bracket – Black or White
|
||
![]() |
AX-12/15 Adjustable Wall / Ceiling Mount Bracket – Black
|
||









