D.A.S. Audio DS 15 A Series Speakers

DS 15 A Powered Active Speakers

Black
$1,007.00

White
$1,007.00

2-way full range powered loudspeaker incorporating a 15" low frequency transducer and a 1" inch throat compression driver mounted to a constant directivity horn. A built-in two-channel mixer comprising a microphone and a line input uses XLR and 1/4 inch for the microphone and line inputs respectively. Level controls are provided for each channel, as well as a main level control. An insert jack and a buffered line output offer added flexibility.

Biamplified 2-way system

150 W low frequency power amplifier

50 W high frequency power amplifier

15 in. cone speaker

1 in. compression driver

View Full Line of Powered Dynamics Series Speakers

Hi Res Image | Tech Data | Related Items | Print Page

SPECIFICATIONS

Frequency Range (-10 dB) 60 Hz – 15 kHz

Amplifier Power 150 W LF / 50 W HF

Rated Peak SPL at 1 m 127 dB

Dispersion 90°H x 70°V

Enclosure Material Polypropylene

AC Requirements 115 V, 50 Hz/60 Hz
230 V, 50 Hz/60 Hz

Current Draw (1/3 Power @ 230V) 0.5 A

Dimensions (H x W x D) 28 in. x 18 in. x 15 in.

Weight 51.5 lbs

The 2-way full range powered loudspeaker shall incorporate a 15 inch cone low frequency transducer and a 1 inch throat compression driver mounted to a constant directivity horn. The frame of the low frequency speaker shall be manufactured of die-cast aluminium. The low frequency voice coil shall be 3 inches in diameter. The high frequency voice coil shall be 1.75 inches in diameter and the diaphragm shall be constructed of titanium.

The system specifications of a typical production unit shall be as follows: On-axis frequency range shall be of 60 Hz to 15 kHz. Coverage angles shall be 90 degrees horizontal and 70 degrees vertical (average of 1/3rd octave bands from 500 to 8 kHz).

Power output for the low frequency amplifier shall be 150 WRMS. Power output for the high frequency amplifier shall be 50 WRMS. A built-in two-channel mixer comprising a microphone and a line input shall be provided. XLR and 1/4 inch jacks shall be used for the microphone and line inputs respectively. Level controls shall be provided for each channel, as well as a main level control. An insert jack and a buffered line output shall be provided.

The system’s low frequency driver shall be mounted as direct radiator into a bass-reflex cabinet constructed of polypropylene. Colour for the "W" version shall be white, otherwise colour shall be black. The low frequency speaker shall be covered with a perforated steel grille, sealed against corrosion using a polyamide powder coat finish. A hand location shall be provided.

The system shall be a D.A.S. DS-15A/15AW.

RELATED ITEMS
	TRD-4 Support pole for appropriate sub cabinets and "top" speaker systems. $11.00
	TRD-2 Tripod speaker stand - Aluminum. $136.00
	ANL-1 Set of 4 M8 eyebolts with 4 carabiners. $31.00
	FUN-15 Protective Transport Cover – Black. $112.00