Anchor Audio | D.A.S. Audio | Soundsphere Loudspeakers | Request Info

Send us your
CAD Drawings or
Blueprints
of your project
Email or Snail Mail

DR 12 A Powered Active Speakers

$862

This product has been discontinued. 2-way full range powered loudspeaker incorporating a 12" low frequency transducer and a 1" inch throat compression driver mounted to a constant directivity horn. A built-in two-channel mixer comprising a microphone and a line input uses XLR and 1/4 inch for the microphone and line inputs respectively. Level controls are provided for each channel, as well as a main level control. An insert jack and a buffered line output offer added flexibility. Biamplified 2-way system 150 W low frequency power amplifier 50 W high frequency power amplifier 12 in. cone speaker 1 in. compression driver View Full Line of Powered Dynamics Series Speakers Hi Res Image |  Tech Data |  Related Items | Print Page SPECIFICATIONS Frequency Range (-10 dB) 60 Hz – 18 kHz Amplifier Power 150 W LF / 50 W HF Rated Peak SPL at 1 m 125 dB Dispersion 100°H x 80°V Enclosure Material Polypropylene AC Requirements 115 V, 50 Hz/60 Hz 230 V, 50 Hz/60 Hz Current Draw (1/3 Power @ 230V) 0.5 A Dimensions (H x W x D) 23 in. x 16 in. x 12 in. Weight 43.5 lbs

The 2-way full range powered loudspeaker shall incorporate a 12 inch cone low frequency transducer and a 1 inch throat compression driver mounted to a constant directivity horn. The low frequency voice coil shall be 3 inches in diameter. The high frequency voice coil shall be 1.75 inches in diameter and the diaphragm shall be constructed of titanium.

The system specifications of a typical production unit shall be as follows: On-axis frequency range shall be of 60 Hz to 18 kHz. Coverage angles shall be 100 degrees horizontal and 80 degrees vertical (average of 1/3rd octave bands from 500 to 8 kHz).

Power output for the low frequency amplifier shall be 150 WRMS. Power output for the high frequency amplifier shall be 50 WRMS. A built-in two-channel mixer comprising a microphone and a line input shall be provided. XLR and 1/4 inch jacks shall be used for the microphone and line inputs respectively. Level controls shall be provided for each channel, as well as a main level control. An insert jack and a buffered line output shall be provided.

The system’s low frequency driver shall be mounted as direct radiator into a bass-reflex cabinet constructed of polypropylene. Colour for the "W" version shall be white, otherwise colour shall be black. The low frequency speaker shall be covered with a perforated steel grille, sealed against corrosion using a polyamide powder coat finish. A hand location shall be provided.

The system shall be a D.A.S. DR-12A/12AW.

RELATED ITEMS
	TRD-4 Support pole for appropriate sub cabinets and "top" speaker systems. $11.00
	TRD-2 Tripod speaker stand - Aluminum. $136.00
	ANL-1 Set of 4 M8 eyebolts with 4 carabiners. $31.00
	FUN-12 Protective Transport Cover – Black. $98.00
REPLACEMENT PARTS (click image to enlarge)
	GM-M-34 HIGH Replacement diaphragm for compression drivers. $30.00
	GM-12MI LOW Complete recone kit for cone loudspeakers. $45.00
	MP-DR-12A POWER MODULE $513.00