D.A.S. Audio Dynamics 115 Series Speakers

Dynamics 115

List Price$747
Our Price$598

The DS 115 combines design with function. The unique enclosure design has three ergonomic handles for easy carrying, will accept a standard 35 mm mounting stand and includes a floor monitor position for added flexibility. Nine rigging points and an optional mounting bracket facilitates use in permanent installations. The 2-way passive design incorporates 15" low frequency transducer and a 1" inch throat compression driver.

Two-way full-range system

Non-powered and powered versions

15 in. speaker with injected molded aluminum chassis

High frequency compression driver with 2 in. titanium diaphragm

Floor monitor position

Standard pole-mount socket for use with tripod

View Full Line of Dynamics Series Speakers

Hi Res Image | Tech Data | Product Catalog | Related Items | Print Page

SPECIFICATIONS

Frequency Range (-10 dB) 50 Hz – 19 kHz

Program Power Capacity 700 W

On-Axis Sensitivity 1W/1 m 100 dB SPL

Dispersion 90°H x 60°V

Impedance 8 Ω

Dimensions (H x W x D) 28 in. x 18.2 in. x 16.52 in.

Weight 40.9 lbs

The 2-way passive full range loudspeaker shall incorporate a 15 inch cone low frequency transducer and a 1 inch throat compression driver mounted to a constant directivity horn. The frame of the low frequency speaker shall be manufactured of die-cast aluminium. The low frequency voice coil shall be 3 inches in diameter. The high frequency voice coil shall be 1.75 inches in diameter and the diaphragm shall be constructed of titanium. The magnet for the high frequencies shall be Neodymium.

The system specifications of a typical production unit shall be as follows: Average (RMS) power handling (based on a two hour test using an IEC band-limited 6 dB crest factor pink noise signal) shall be 350W. On-axis frequency range shall be of 50 Hz to 19 kHz. On-axis sensitivity (1W / 1m) shall be 100 dB SPL. Coverage angles shall be 90 degrees horizontal and 60 degrees vertical (average of 1/3rd octave bands from 500 to 8 kHz). Nominal impedance shall be 8 ohms.

The system’s low frequency driver shall be mounted as direct radiator into a bass-reflex cabinet constructed of polypropylene. The low frequency speaker shall be covered with a perforated steel grille, sealed against corrosion using a polyamide powder coat finish. Three bar handles shall be provided. Nine 8M rigging points shall be provided.

The system shall be a D.A.S. DS-115.

RELATED ITEMS
	TRD-4 Support pole for appropriate sub cabinents and "top" speaker systems. $11.00
	TRD-2 Tripod speaker stand Aluminum. $136.00
	AX-115 Wall mount bracket – Black. $94.00
	ANL-1 Rigging Kit with set of 4 M8 eyebolts with 4 carabiners. $31.00
	FUN-DS-115 Protective Transport Cover – Black. $108.00