D.A.S. Audio DS 108 A Series Speakers

DS 108 A Powered Active Speakers

$759.00

2-way full range powered loudspeaker system incorporates an 8" low frequency transducer and a 1" throat compression driver mounted on a wide dispersion horn. A built-in two-channel mixer comprises both microphone and line inputs. Level controls are provided for each channel, as well as a main level control. A buffered line output offers added flexibility.

Biamplified 2-way vented loudspeaker system

8 in. cone speaker

1 in. compression driver

150 W + 50 W power amplifier

Polypropylene enclosure

View Full Line of Powered Dynamics Series Speakers

Hi Res Image | Tech Data | User Manual | Related Items | Print Page

SPECIFICATIONS

Frequency Range (-10 dB) 52 Hz – 19 kHz

Amplifier Power 150 W LF / 50 W HF

Rated Peak SPL at 1 m 120 dB

Dispersion 90°H x 45°V

Enclosure Material Mineral Loaded Polypropylene

AC Requirements 115 V, 50 Hz/60 Hz
230 V, 50 Hz/60 Hz

Current Draw (1/3 Power @ 230V) 0.5 A

Dimensions (H x W x D) 18 in. x 12 in. x 12 in.

Weight 27 lbs

The 2-way full range powered loudspeaker shall incorporate an 8 inch cone low frequency transducer and a 1 inch throat compression driver mounted to a constant directivity horn. The low frequency voice coil shall be 1.5 inches in diameter. The high frequency voice coil shall be 1.75 inches in diameter and the diaphragm shall be constructed of titanium.

The system specifications of a typical production unit shall be as follows: On-axis frequency range shall be of 52 Hz to 19 kHz. Coverage angles shall be 110 degrees horizontal and 100 degrees vertical (average of 1/3rd octave bands from 500 to 8 kHz).

Power output for the low frequency amplifier shall be 150 WRMS. Power output for the high frequency amplifier shall be 50 WRMS. A built-in two-channel mixer comprising a microphone and a line input shall be provided. XLR and combo XLR-1/4 inch jacks shall be used for the microphone and line inputs respectively. Level controls shall be provided for each channel, as well as a main level control. A buffered line output shall be provided.

The system’s low frequency driver shall be mounted as direct radiator into a bass-reflex cabinet constructed of polypropylene. Colour for the "W" version shall be white, otherwise colour shall be black. The front of the system shall be covered with a perforated steel grille, sealed against corrosion using a polyamide powder coat finish. A built-in handle shall be provided.

The system shall be a D.A.S. DS-108A/108AW.

RELATED ITEMS
	AX-M Adjustable wall mount bracket. $87.00
	TRD-2 Tripod speaker stand - Aluminum. $136.00
	ANL-1 Set of 4 M8 eyebolts with 4 carabiners. $31.00
	FUN-DS-108 Protective Transport Cover – Black. $106.00