DAS Audio


Previous Page

RF 215.96

Two-Way Passive Vented Speaker

RF 215.96
RF 215.996 Speaker

list price: $2644
our price: $1720

This passive/active two-way system for fixed or portable sound reinforcement systems has an internal crossover network with rear located mode selector switch. Two 15G low frequency transducers with 4 in. coils and "double spider" suspension reproduce bass and an ND-10 compression driver with neodymium magnet structure and 4 in. voice coil handles the high frequencies. Two rear located wheels and steel-reinforced handles facilitate manoeuvring and 12 M10 rigging points permit the cabinets to be flown safely.

View RF Series
RF 215.96 Features:
  • 2 way vented loudspeaker system
  • 2 x 15 in. cone speaker
  • 1.5 in. compression driver with constant directivity horn
  • 1400 W power handling
  • Twin 15G Hi-power woofers with 4 in. voice coil
  • ND-10 Neodymium driver with 4 in. titanium diaphragm
  • Passive or Bi-amp operation
  • 12 M10 rigging points
  • Painted in durable Isoflex paint
  • Rear located wheels for ease of transport
RF 215.96 Accessories:


Rigging Kit With 4 Eyebolts + 4 Carabiners.


RF 15.96 Replacement Parts:


Replacement diaphragm for compression drivers.




Complete recone kit for cone loudspeakers.


RF 215.96 Specifications:

RMS Power Handling Passive: 1400 W
LF: 1400 W
HF: 200 W
Peak Power Handling Passive: 5600 W
LF: 5600 W
HF: 800 W
Frequency Range (-10 dB) 37 Hz-20 kHz
Nominal Impedance Pasive: 4 ohms
LF: 4 ohms
HF: 8 ohms
On-axis Sensitivity 1 W / 1 m LF: 102 dB SPL
HF: 101 dB SPL
Rated Peak SPL at 1 m LF: 139 dB
HF: 130 dB
Dispersion 90°H x 60°V Rotatable
Enclosure Material Plywood
Color/Finish Black / Iso-Flex Paint
Connectors 2 x NL4 Speakon
Dimensions (H x W x D) 47.2 x 21 x 19.1 in
120 x 55 x 48.5 cm
Weight 137.5 lbs.
62.5 kg

This passive full-range, two-way system comprises two 15 inch cone woofers with a four inch voice coil. The high frequency section comprises a large format compression driver with a four inch titanium diaphragm and neodymium magnet, coupled to a 90° x 60° horn. It comprises an injection molded aluminum chassis. It includes a transformer to select passive or bi-amplified mode.

A typical production unit has the following specifications:

Average (RMS) power handling (based on a two-hour test using a 6 dB crest factor pink noise signal band-limited according to IEC standards) is rated at 1400 W (passive mode), LF: 1400W and HF: 200W (bi-amplified mode). On-axis (IEC) frequency range is 37 Hz to 20 kHz (-10 dB). On-axis sensitivity (1W /1m) is 102 dB SPL in LF and 101 dB SPL in HF. Coverage angles are 90 degrees horizontal and 60 degrees vertical (average one-third octave band of 500 Hz to 8 kHz). Nominal impedance is 4 ohms for LF and 8 ohms for HF.

The subwoofer unit is mounted in direct radiation configuration inside a bass-reflex trapezoidal cabinet using 18mm Birch plywood. The unit is painted with catalyzed polyurethane paint and finished with an Isoflex coating. The front is protected by a steel grille, coated with a corrosion-resistant polyamide film. The system includes 12 M10 rigging points situated on the top, underneath and on either side of the enclosure. Two handles and two rear transportation wheels are also provided.

The system shall be a D.A.S. RF-215.96 system.