DAS Audio

 














Previous Page

Factor 8

Two-Way Passive Full Range Speaker

Factor 8
Factor 8 Speaker

list price: $308
our price: $250


The Factor-8 is a full-range system that houses an 8 in. low frequency transducer with a 1.5 in. voice coil. The high frequency unit is a 1 in. soft dome tweeter with a specially designed crossover network and wide dispersion characteristics similar to those of the Factor 5. Available in an outddor IP-54 version.

View Factor Series
Factor 8 Features:
  • 2-way Full Range System
  • Vertical or Horizontal Use
  • Wide Coverage
  • Hi-Fi Sound Character
  • Music Monitor
  • 1 in. x 8 in. + Tweeter
  • 200 Watts Program Power
  • 117 dB Peak SPL
Factor 8 Accessories:

AXW-1
AXW-1

Adjustable wall mount.

$70


Factor 8 Replacement Parts:

TWT-8
TWT-8

HIGH
Complete tweeter replacement for high frequency ways.

$26




G-8


G-8

LOW
Complete replacement loudspeaker for low fequency ways.

$70


Factor 8 Specifications:

RMS Power Handling 100 W
Peak Power Handling 400 W
Frequency Range (-10 dB) 55 Hz-24 kHz
Nominal Impedance 8 ohms
On-axis Sensitivity 1 W / 1 m 91 dB SPL
Rated Peak SPL at 1 m 117 dB
Dispersion 145°H x 135°V
Enclosure Material Polypropylene
Color/Finish Black or White
Connectors Spring-Loaded Terminals
Dimensions (H x W x D) 17.5 x 10.5 x 9 in
44 x 27 x 23 cm
Weight 16.5 lbs.
7.4 kg


The 2-way passive full range loudspeaker shall incorporate an 8 inch cone low frequency transducer and a 1 inch soft dome high frequency unit. The low frequency voice coil shall be 1.5 inches in diameter.

The system specifications of a typical production unit shall be as follows: Average (RMS) power handling (based on a two hour test using an IEC band-limited 6 dB crest factor pink noise signal) shall be 100W. IEC on-axis frequency range shall be of 55 Hz to 24 kHz. On-axis sensitivity (1W / 1m) shall be 91 dB SPL. Coverage angles shall be 145 degrees horizontal and 135 degrees vertical (average of 1/3rd octave bands from 500 to 10 kHz). Nominal impedance shall be 8 ohms.

The system’s low frequency driver shall be mounted as direct radiator into a bass-reflex cabinet constructed of polypropylene. Colour for the "W" version shall be white, otherwise colour shall be black. The front of the system shall be covered with a perforated steel grille, sealed against corrosion using a polyamide powder coat finish. A hand location shall be provided.

The system shall be a D.A.S. Factor 8/8W.