DAS Audio

 














Previous Page

DR 112

Two-Way Passive Full Range Speaker

DR 112
DR 112 Speaker

list price: $351
our price: $350


The DR 112 combines design with function in a medium size enclosure. It’s unique enclosure offers an oversized handle for easy carrying, will accept a standard 35 mm mounting stand and includes a floor monitor position for added flexibility. Built-in rigging points and an optional mounting bracket facilitates use in permanent installations. The 2-way passive design incorporates 12" low frequency transducer and the M-34 compression driver.

View DR Series
DR 112 Features:
  • Two-way full-range system
  • Non-powered and powered versions
  • 12 in. speaker with injected molded aluminum chassis
  • High frequency compression driver with 2 in. titanium diaphragm
  • Floor monitor position
  • Standard pole-mount socket for use with tripod
DR 112 Accessories:

ANL-1
ANL-1

Rigging Kit With 4 Eyebolts + 4 Carabiners.

$35


FUN-DR-112
FUN-DR-112

Protective transport cover for 1 DR-112/DR-112A.

$102


AX-115
AX-115

Adjustable wall mount.

$102




TRD-2


TRD-2

Speaker stand for 35 mm pole mount sockets.

$146




TRD-4


TRD-4

Pole mount for sub.

$15


DR 112 Replacement Parts:

GM-M-34
GM-M-34

HIGH
Replacement diaphragm for compression drivers.

$50




12MI


12MI

LOW
Complete replacement loudspeaker for low fequency ways.

$62



GM-12MI


GM-12MI

LOW
Complete recone kit for cone loudspeakers.

$62


DR 112 Specifications:

RMS Power Handling 300 W
Peak Power Handling 1200 W
Frequency Range (-10 dB) 50 Hz-20 kHz
Nominal Impedance 8 ohms
On-axis Sensitivity 1 W / 1 m 98 dB SPL
Rated Peak SPL at 1 m 131 dB
Dispersion 90°H x 45°V
Enclosure Material Polypropylene
Color/Finish Black
Connectors 2 x NL4 Speakon
Dimensions (H x W x D) 24 x 16 x 15 in
62 x 40 x 37 cm
Weight 36.5 lbs.
16.6 kg


The 2-way passive full range loudspeaker shall incorporate a 12 inch cone low frequency transducer and a 1 inch throat compression driver mounted to a constant directivity horn. The frame of the low frequency speaker shall be manufactured of die-cast aluminium. The low frequency voice coil shall be 3 inches in diameter. The high frequency voice coil shall be 1.75 inches in diameter and the diaphragm shall be constructed of titanium.

The system specifications of a typical production unit shall be as follows: Average (RMS) power handling (based on a two hour test using an IEC band-limited 6 dB crest factor pink noise signal) shall be 300W. On-axis frequency range shall be of 50 Hz to 16 kHz. On-axis sensitivity (1W / 1m) shall be 98 dB SPL. Coverage angles shall be 100 degrees horizontal and 75 degrees vertical (average of 1/3rd octave bands from 500 to 8 kHz). Nominal impedance shall be 8 ohms.

The system’s low frequency driver shall be mounted as direct radiator into a bass-reflex cabinet constructed of polypropylene. The low frequency speaker shall be covered with a perforated steel grille, sealed against corrosion using a polyamide powder coat finish. One bar handle shall be provided. Nine 8M rigging points shall be provided.

The system shall be a D.A.S. DR-112.