DAS Audio

 














Previous Page

DR 108A

Two-Way Powered Full Range Speaker

DR 108A
DR 108A Speaker

list price: $672
our price: $505


This 2-way full range powered loudspeaker system incorporates an 8 in. low frequency transducer and a compression driver mounted on a wide dispersion horn. A built-in two-channel mixer comprises both microphone and line inputs. Level controls are provided for each channel, as well as a main level control.

View DR Series
DR 108A Features:
  • Biamplified 2-way vented loudspeaker system
  • 8 in. cone speaker
  • 1 in. compression driver
  • 150 W + 50 W power amplifier
  • Polypropylene enclosure
DR 108A Accessories:

ANL-1
ANL-1

Rigging Kit With 4 Eyebolts + 4 Carabiners.

$35


FUN-DR-108
FUN-DR-108

Protective transport cover for 1 DR-108/DR-108A.

$114


AX-108
AX-108

Adjustable wall mount.

$53


AX-M
AX-M

Adjustable wall mount.

$96




TRD-2


TRD-2

Speaker stand for 35 mm pole mount sockets.

$146




TRD-4


TRD-4

Pole mount for sub.

$15


DR 108A Replacement Parts:

GM-M-26
GM-M-26

HIGH
Replacement diaphragm for compression drivers.

$23




8B


8B

LOW
Complete replacement loudspeaker for low fequency ways.

$70




MP-DR-108A


MP-DR-108A

POWER MODULE
Power Module

$536


DR 108A Specifications:

Nominal LF Amplifier Power 150 W
Nominal HF Amplifier Power 50 W
Frequency Range (-10 dB) 60 Hz-18 kHz
Rated Peak SPL at 1 m 120 dB
Dispersion 90°H x 45°V
Enclosure Material Polypropylene
Color/Finish Black
Connectors Input: Female XLR-Jack
Loop Thru: Jack
Mic: XLR
AC Input: Male IEC
AC Requirements 115 V, 50 Hz/60 Hz
230 V, 50 Hz/60 Hz
Current Draw (1/3 power @ 230 V) 0.5 A
Dimensions (H x W x D) 18 x 12 x 12 in
45 x 30 x 30 cm
Weight 26.8 lbs.
12.2 kg


The 2-way full range powered loudspeaker shall incorporate an 8 inch cone low frequency transducer and a 1 inch throat compression driver mounted to a constant directivity horn. The low frequency voice coil shall be 1.5 inches in diameter. The high frequency voice coil shall be 1.75 inches in diameter and the diaphragm shall be constructed of titanium.

The system specifications of a typical production unit shall be as follows: On-axis frequency range shall be of 52 Hz to 19 kHz. Coverage angles shall be 110 degrees horizontal and 100 degrees vertical (average of 1/3rd octave bands from 500 to 8 kHz).

Power output for the low frequency amplifier shall be 150 WRMS. Power output for the high frequency amplifier shall be 50 WRMS. A built-in two-channel mixer comprising a microphone and a line input shall be provided. XLR and combo XLR-1/4 inch jacks shall be used for the microphone and line inputs respectively. Level controls shall be provided for each channel, as well as a main level control. A buffered line output shall be provided.

The system’s low frequency driver shall be mounted as direct radiator into a bass-reflex cabinet constructed of polypropylene. Colour for the "W" version shall be white, otherwise colour shall be black. The front of the system shall be covered with a perforated steel grille, sealed against corrosion using a polyamide powder coat finish. A built-in handle shall be provided.

The system shall be a D.A.S. DR-108A/108AW.