CL-8T
list price: $68 our price: $68
|
2-way passive full range ceiling loudspeaker that incorporates an 8 in. cone low frequency transducer and a ferrofluid cooled 1" soft dome high frequency unit with integral diffraction ring. The unit is equipped with a multi-tap line. The system’s low frequency driver is mounted on a plastic support with mounting tabs for fixing to ceiling surfaces. The front of the system shall be covered with a perforated metal grille.
View Ceiling Series
| CL-8T Features: |
- Flush mount, ceiling speaker
- 1 x 8 in. + tweeter
- Two-way full range ceiling speaker
- 8 in. low frequency driver
- Coaxial tweeter
- 70V, 100V distributed systems
- High effeciency multi-tap transformer
|
CL 8T Specifications:
|
| Frequency Range (-10 dB) |
50 Hz-20 kHz |
 |
| On-axis Sensitivity 1 W / 1 m |
90 dB SPL |
 |
| Transformer Taps |
10/20/30 W (100V) 5/7.5/10 W (70 V) |
 |
| Enclosure Material |
Plastic |
 |
| Color/Finish |
White |
 |
| Connectors |
Screw Terminals |
 |
| Dimensions (H x W x D) |
3.8 x 10.8 in 97 x 275 mm |
 |
| Weight |
4.20 lbs. 1.9 kg |
The 2-way passive full range ceiling loudspeaker shall incorporate an 8 inch cone low frequency transducer and a ferrofluid cooled 1 inch soft dome high frequency unit with integral diffraction ring. The low frequency voice coil shall be 1 inch in diameter. The high frequency voice coil shall be 0.5 inches in diameter.
The system specifications of a typical (transformer less) production unit shall be as follows: Average (RMS) power handling shall be 60W. Frequency range shall be of 50 Hz to 20 kHz. On-axis sensitivity (1W / 1m) shall be 90 dB SPL. Coverage angles shall be 90 degrees horizontal and vertical (average of 1/3rd octave bands from 500 to 8 kHz). Nominal impedance shall be 8 ohms.
The system’s low frequency driver shall be mounted on a plastic support that houses mounting tabs for fixing to ceiling surfaces. Colour shall be white. The front of the system shall be covered with a perforated metal grille. The system shall incorporate a 30W multi-tap input transformer.
The system shall be a D.A.S. CL-8T. |
|
|