DAS Audio

 














Previous Page

CL-6

6 in. Ceiling Speakers

CL-6
CL 6 Speaker

list price: $50
our price: $51


2-way passive full range ceiling loudspeaker incorporating a 6.5 in. cone low frequency transducer and a ferrofluid cooled soft dome high frequency unit with integral diffraction ring. The system’s low frequency driver is mounted on a plastic support with mounting tabs for fixing to ceiling surfaces. The front of the system shall be covered with a perforated metal grille.

View Ceiling Series
CL-6 Features:
  • Flush mount, ceiling speaker
  • 1 x 6 in. + tweeter
  • Two-way full range ceiling speaker
  • 6 in. low frequency driver
  • Coaxial tweeter
  • Extended frequency range
  • 80 Watts Program Power
  • CL-6T Transformer Version
  • CL-6TB Transformer Version with Backcan
CL 6 Specifications:

RMS Power Handling 40 W
Peak Power Handling 160 W
Frequency Range (-10 dB) 60 Hz-20 kHz
Nominal Impedance 8 ohms
On-axis Sensitivity 1 W / 1 m 90 dB SPL
Enclosure Material Plastic
Color/Finish White
Connectors Spring Terminal
Dimensions (H x W x D) 3.15 x 9 in
80 x 230 mm
Weight 2.62 lbs.
1.19 kg


The 2-way passive full range ceiling loudspeaker shall incorporate an 6.5 inch cone low frequency transducer and a ferrofluid cooled 1 inch soft dome high frequency unit with integral diffraction ring. The low frequency voice coil shall be 1 inch in diameter. The high frequency voice coil shall be 0.5 inches in diameter.

The system specifications of a typical production unit shall be as follows: Average (RMS) power handling shall be 40W. Frequency range shall be of 60 Hz to 20 kHz. On-axis sensitivity (1W / 1m) shall be 90 dB SPL. Coverage angles shall be 100 degrees horizontal and vertical (average of 1/3rd octave bands from 500 to 8 kHz). Nominal impedance shall be 8 ohms.

The system’s low frequency driver shall be mounted on a plastic support that houses mounting tabs for fixing to ceiling surfaces. Colour shall be white. The front of the system shall be covered with a perforated metal grille.

The system shall be a D.A.S. CL-6.