CL-5T
list price: $46 our price: $47
|
Full range ceiling loudspeaker incorporates a 5.25 inch full-range double-cone transducer with a 1 inch voice coil and multi-tap line transformer. The system’s low frequency driver is mounted on a plastic support that houses mounting tabs for fixing to ceiling surfaces. The front of the system is protected by a perforated metal grille.
View Ceiling Series
| CL-5T Features: |
- Flush mount dual-cone full range ceiling speaker
- 5 in. double cone loudspeaker
- Polypropylene cone resists deterioration
- High efficiency multi-tap transformer
- 70V, 100V distributed systems
|
CL 5T Specifications:
|
| Frequency Range (-10 dB) |
70 Hz-15 kHz |
 |
| On-axis Sensitivity 1 W / 1 m |
89 dB SPL |
 |
| Transformer Taps |
3/6/X W (100 V) 1.5/3/6 W (70 V) |
 |
| Enclosure Material |
Plastic |
 |
| Color/Finish |
White |
 |
| Connectors |
Screw Terminals |
 |
| Dimensions (H x W x D) |
2.76 x 8.1 in 70 x 205 mm |
 |
| Weight |
1.98 lbs. 0.9 kg |
The full range ceiling loudspeaker shall incorporate a 5.25 inch full-range double-cone transducer. The voice coil shall be 1 inch in diameter.
The system specifications of a typical (transformer less) production unit shall be as follows: Average (RMS) power handling shall be 20W. Frequency range shall be of 70 Hz to 15 kHz. On-axis sensitivity (1W / 1m) shall be 89 dB SPL. Coverage angles shall be 110 degrees horizontal and vertical (average of 1/3rd octave bands from 500 to 8 kHz). Nominal impedance shall be 8 ohms.
The system’s low frequency driver shall be mounted on a plastic support that houses mounting tabs for fixing to ceiling surfaces. Colour shall be white. The front of the system shall be covered with a perforated metal grille. The system shall incorporate a 6W multi-tap input transformer with switch positions for power settings ranging from at least 6 to 1.5W in 3 dB steps for 70V lines.
The system shall be a D.A.S. CL-5T. |
|
|