DAS Audio

 














Previous Page

Arco 4T

Two-Way Passive Speaker w/ Multi-Tap Transformer

Arco 4T
Arco 4T Speaker

list price: $152
our price: $124


The Arco 4T incorporates a 4 in. woofer with weather resistant polypropylene cone. High frequency reproduction is handled by a 19 mm neodymium dome tweeter for brilliant highs. An Overload Safety Circuit protects the speakers from damage in case of overpowering.

Includes a multi-tap transformer with 5-10-15 W settings. Available in an outddor IP-54 version.

View Arco Series
Arco 4T Features:
  • Molded high-impact ABS enclosure
  • 4 in. woofer with weather resistant polypropylene cone
  • 19 mm neodymium dome tweeter for brilliant highs
  • Overload Safety Circuit protects the speakers from damage
  • 4 M6 rigging points
  • Adjustable ceiling / wall mount
  • Safety cable attachement point
  • "IP" versions are available for outdoor use
  • Available in black or white color options
Arco 4T Accessories:

AX-4RM
AX-4RM

Adjustable wall/ceiling mount included with Arco 4T.

$12




AXA-AC


AXA-AC

Accessory for assembling arrays of Arco 4 and Arco 24 (Requires AXU mount).

$32




AXU-AC4


AXU-AC4

"U" bracket for wall/ceiling mounting of Arco 4, Arco 4T. Available in black or white.

$45




ARCO-IP-KIT


ARCO-IP-KIT

IP54 connector cover kit.

$20


Arco 4 Replacement Parts:

TWT-4
TWT-4

HIGH
Replacement tweeter replacement for high frequency ways.

$29




G-4


G-4

LOW
Complete replacement loudspeaker for low frequency ways.

$39


Arco 4T Specifications:

RMS Power Handling 50 W
Peak Power Handling 200 W
Frequency Range (-10 dB) 72 Hz-22 kHz
On-axis Sensitivity 1 W / 1 m 86 dB SPL
Rated Peak SPL at 1 m 109 dB
Transformer Taps 15/10/5 W (100 V)
7.5/5/2.5 W (70 V)
Dispersion 90°H x 90°V
Enclosure Material Paintable ABS Plastic
Color/Finish Black or White
Connectors Spring-Loaded Terminals
Dimensions (H x W x D) 8.7 x 5.5 x 5.5 in
21 x 14 x 14 cm
Weight 3.5 lbs.
1.6 kg


This passive two-way system comprises a single four inch weather resistant polypropylene cone woofer and a 19 mm neodymium dome tweeter. All components are protected by a full-range protection system. It includes four M6 rigging points.

A typical production unit has the following specifications: Average (RMS) power handling (based on a two-hour test using a 6 dB crest factor pink noise signal bandlimited according to IEC standards) is rated at 50 W. On-axis (IEC) frequency range is 72 Hz to 22 kHz (-10 dB). On-axis sensitivity (1W / 1m) is 86 dB SPL. Coverage angles are 90 degrees horizontal and 90 degrees vertical (average one-third octave band of 500 Hz to 10 kHz). Nominal impedance is 8 ohms. The "T" version features a 100V multi-tap line transformer with 5, 10 and 15W settings, complying with IP-54 standards for outdoor use.

The enclosure is molded in high impact ABS plastic and is available in black or white. Its ultra-compact design and paintable surface ensure easy integration into any type of surroundings. The front is protected by a corrosion-resistant grille, lined inside with acoustically transparent speaker cloth. It includes an adjustable wall/ceiling support. Optional rigging accessories include: "U" ceiling or wall brackets and an accessory for configuring vertical arrays of up to six units or clusters of up to three loudspeakers.

The system shall be a D.A.S. ARCO 4 system.