Arco 4
list price: $130 our price: $105
|
The Arco 4 incorporates a 4 in. woofer with weather resistant polypropylene cone. High frequency reproduction is handled by a 19 mm neodymium dome tweeter for brilliant highs. An Overload Safety Circuit protects the speakers from damage in case of overpowering. Available in an outddor IP-54 version.
View Arco Series
| Arco 4 Features: |
- Molded high-impact ABS enclosure
- 4 in. woofer with weather resistant polypropylene cone
- 19 mm neodymium dome tweeter for brilliant highs
- Overload Safety Circuit protects the speakers from damage
- 4 M6 rigging points
- Adjustable ceiling / wall mount included
- Safety cable attachement point
- "T" version are equipped with factory-installed multi-tap transformers
- "IP" versions are available for outdoor use
- Available in black or white color options
|
Arco 4 Accessories:
|

|
AX-4RM
Adjustable wall/ceiling mount included with Arco 4.
$12
|
 |

|
AXA-AC
Accessory for assembling arrays of Arco 4 and Arco 24 (Requires AXU mount).
$32
|
 |

|
AXU-AC4
"U" bracket for wall/ceiling mounting of Arco 4, Arco 4T. Available in black or white.
$45
|
 |

|
ARCO-IP-KIT
IP54 connector cover kit.
$20
|
 |
Arco 4 Replacement Parts:
|

|
TWT-4
HIGH Replacement tweeter replacement for high frequency ways.
$29
|
 |

|
G-4
LOW Complete replacement loudspeaker for low frequency ways.
$39
|
 |
Arco 4 Specifications:
|
| RMS Power Handling |
50 W |
 |
| Peak Power Handling |
200 W |
 |
| Frequency Range (-10 dB) |
72 Hz-22 kHz |
 |
| Nominal Impedance |
8 ohms |
 |
| On-axis Sensitivity 1 W / 1 m |
86 dB SPL |
 |
| Rated Peak SPL at 1 m |
109 dB |
 |
| Dispersion |
90°H x 90°V |
 |
| Enclosure Material |
Paintable ABS Plastic |
 |
| Color/Finish |
Black or White |
 |
| Connectors |
Spring-Loaded Terminals |
 |
| Dimensions (H x W x D) |
8.7 x 5.5 x 5.5 in 21 x 14 x 14 cm |
 |
| Weight |
3.5 lbs. 1.6 kg |
This passive two-way system comprises a single four inch weather resistant polypropylene cone woofer and a 19 mm neodymium dome tweeter. All components are protected by a full-range protection system. It includes four M6 rigging points.
A typical production unit has the following specifications: Average (RMS) power handling (based on a two-hour test using a 6 dB crest factor pink noise signal bandlimited according to IEC standards) is rated at 50 W. On-axis (IEC) frequency range is 72 Hz to 22 kHz (-10 dB). On-axis sensitivity (1W / 1m) is 86 dB SPL. Coverage angles are 90 degrees horizontal and 90 degrees vertical (average one-third octave band of 500 Hz to 10 kHz). Nominal impedance is 8 ohms. The "T" version features a 100V multi-tap line transformer with 5, 10 and 15W settings, complying with IP-54 standards for outdoor use.
The enclosure is molded in high impact ABS plastic and is available in black or white. Its ultra-compact design and paintable surface ensure easy integration into any type of surroundings. The front is protected by a corrosion-resistant grille, lined inside with acoustically transparent speaker cloth. It includes an adjustable wall/ceiling support. Optional rigging accessories include: "U" ceiling or wall brackets and an accessory for configuring vertical arrays of up to six units or clusters of up to three loudspeakers.
The system shall be a D.A.S. ARCO 4 system. |
|
|