DAS Audio

 














Previous Page

Arco 24

Two-Way Passive Speaker

Arco 24
Arco 24 Speaker

list price: $187
our price: $153


The Arco 24 incorporates two 4 in. woofers with weather resistant polypropylene cones. High frequency reproduction is handled by a 25 mm neodymium dome tweeter for brilliant highs and balanced performance. An Overload Safety Circuit protects the speakers from damage in case of overpowering. Available in an outddor IP-54 version.

View Arco Series
Arco 24 Features:
  • Molded high-impact ABS enclosures
  • 2 x 4 in. woofer with weather resistant polypropylene cone
  • 25 mm neodymium dome tweeter for brilliant highs
  • Overload Safety Circuit protects the speakers from damage
  • 4 M6 rigging points
  • Adjustable ceiling / wall mount included
  • Safety cable attachement point
  • "T" version are equipped with factory-installed multi-tap transformers
  • "IP" versions are available for outdoor use
  • Available in black or white color options
Arco 24 Accessories:



AXA-AC


AXA-AC

Accessory for assembling arrays of Arco 4 and Arco 24 (Requires AXU mount).

$32




AXU-AC24


AXU-AC24

"U" bracket for wall/ceiling mounting of Arco 24, Arco 24T. Available in black or white.

$48




ARCO-IP-KIT


ARCO-IP-KIT

IP54 connector cover kit.

$20


Arco 24 Replacement Parts:

TWT-24
TWT-24

HIGH
Replacement tweeter replacement for high frequency ways.

$32




4G4


4G4

LOW
Complete replacement loudspeaker for low frequency ways.

$29


Arco 24 Specifications:

RMS Power Handling 100 W
Peak Power Handling 200 W
Frequency Range (-10 dB) 65 Hz-22 kHz
Nominal Impedance 8 ohms
On-axis Sensitivity 1 W / 1 m 89 dB SPL
Rated Peak SPL at 1 m 115 dB
Dispersion 80°H x 70°V
Enclosure Material Paintable ABS Plastic
Color/Finish Black or White
Connectors Spring-Loaded Terminals
Dimensions (H x W x D) 17.7 x 5.9 x 5.9 in
34 x 15 x 15 cm
Weight 5.7 lbs.
2.6 kg


This passive two-way system comprises two four inch weather resistant polypropylene cone woofers and a 25 mm neodymium dome tweeter. All components are protected by a full-range protection system. It includes four M6 rigging points.

A typical production unit has the following specifications: Average (RMS) power handling (based on a two-hour test using a 6 dB crest factor pink noise signal band-limited according to IEC standards) is rated at 100 W. On-axis (IEC) frequency range is 65 Hz to 22 kHz (-10 dB). On-axis sensitivity (1W / 1m) is 89 dB SPL. Coverage angles are 80 degrees horizontal and 70 degrees vertical (average one-third octave band of 500 Hz to 10 kHz). Nominal impedance is 8 ohms. The "T" version features a 100V multi-tap line transformer with 10, 20 and 30W settings, complying with IP-54 standards for outdoor use.

The enclosure is molded in high impact ABS plastic and is available in black or white. Its ultra-compact design and paintable surface ensure easy integration into any type of surroundings. The front is protected by a corrosion-resistant grille, lined inside with acoustically transparent speaker cloth. It includes an adjustable wall/ceiling support. Optional rigging accessories include: "U" ceiling or wall brackets and an accessory for configuring vertical arrays of up to six units or clusters of up to three loudspeakers.

The system shall be a D.A.S. ARCO 24 system.