D.A.S. Audio Compact 2 Self Powered System

Compact 2

List Price$4999
Our Price$3300

The Compact 2 is a powered three-way full-range loudspeaker system designed to be used in conjunction with powered subwoofer units such as the Compact 18 Sub or Compact 218 Sub. This biamplified system incorporates two Class D switching amplifiers for the low and mid-high frequency sections. A complete sound reinforcement solution in a single easy to use package. The Compact 2 system is intended for use in sound reinforcement applications where midrange presence and pattern control are desired. It can be reinforced with the Compact 18SUB or Compact 218SUB subwoofer unit, but provides sufficient bass response to be used as a stand alone full-range unit.

Powered 3-way mid-high system

Two channel Class D amplifier 500 W LF + 500 W MF/HF

15 in. loudspeaker with neodymium magnet

10 in. "Bullet" mid-range device

1.5 in. ND-10 neodymium driver

Ancra track rigging system and rear wheels

View Full Line of Compact Loudspeaker Systems

HiRes Image User Manual Tech Data Catalog elated Items Print

Installations:

Aero Success in New York
The 27th Colombian Independence Day Festival, organised by the Colombian Civic Center at Flushing Meadows-Corona Park, in Queens will certainly go down in history because this year non-other than the country’s leader himself took part. Alvaro Uribe Velez, President of Colombia, took the stage at the festival, celebrating the 197th anniversary of Colombian Independence and addressed the public with a positive and hopeful speech. Read More...

SPECIFICATIONS

Nominal LF Amplifier Power 500 W

Nominal MF/HF Amplifier Power 500 W

Frequency Range (-10 dB) 50 Hz- 19 kHz

Rated Peak SPL at 1 m 135 dB

Dispersion 60° H x 50° V

Color / Finish Black / Paint

Enclosure Material Plywood

Connectors Input: Female XLR
Loop Thru: Male XLR
AC Input: PowerCon NAC3

AC Requirements 115 V, 50 Hz/60 Hz
230 V, 50 Hz/60 Hz

Current Draw (1/3 Power @ 230V) 0.65 A

Dimensions (H x W x D) 34.25 x 23.5 x 24.8 in

Weight 153 lbs

The 3-way full range powered loudspeaker shall incorporate a 15 inch cone low frequency transducer, a 10 inch cone mid frequency transducer coupled to an integral polymer horn, and a 1.5 inch throat compression driver mounted to a constant directivity horn. All transducers shall use Neodymium magnets. The frame of the low and mid frequency speakers shall be manufactured of die-cast aluminium. The low frequency voice coil shall be 4 inches in diameter. The mid frequency voice coil shall be 4 inches in diameter. The high frequency voice coil shall be 4 inches in diameter and the diaphragm shall be constructed of titanium.

The system specifications of a typical production unit shall be as follows: on-axis frequency range shall be of 50 Hz to 19kHz. Nominal maximum peak SPL shall be 135 to 139 dB SPL. Coverage angles shall be 60 degrees horizontal and 50 degrees vertical. The system’s low frequency driver shall be mounted as direct radiator into a bass-reflex cabinet constructed of 16 mm composite plywood. It shall be finished with hardwearing catalyzed polyurethane paint. The front of the system shall be protected with a perforated steel grille, sealed against corrosion using a polyamide powder coat finish, and backed with a reticulated foam filter. Three handles and transport wheels shall be provided. ManFlying side flying points shall be provided.

The system shall feature two class-D amplifier for the mid-high and low frequencies. Nominal power output for the low frequency amplifier shall be 500 WRMS. Nominal power output for the mid-high frequency amplifier shall be 500 WRMS. Maximum amplifier efficiencies shall reach 93%. The amplifiers shall contain protection systems. The built-in active 2-way equalised crossover shall provide 24 dB/octave slopes. The input shall be electronically balanced on an XLR connector, and an output XLR loop through connector shall also be provided. AC connection shall be through a detachable PowerCon NAC 3 cable. Display LEDs shall be provided.

The system shall be a D.A.S. Compact 2.

RELATED ITEMS
Flying
	ANL-2 Rigging Kit With 4 Eyebolts + 4 Carabiners. $42
	ANL-3 Double Stud Clip for Ancra L-Track. $28
Transport Covers
	FUN-COMPACT-2 Protective transport cover for 1 Compact 2. $153
REPLACEMENT PARTS (click image to enlarge)
	GM-K-8H HIGH Replacement diaphragm for compression drivers. $165
	GM-10B MID Complete recone kit for cone loudspeakers. $120
	GM-15B LOW Complete recone kit for cone loudspeakers. $136
	MP-COMPACT-2 POWER MODULE $1485


Sound Audio Systems is a division of Signature Ventures