D.A.S. Audio CL 8 Ceiling Series Loudspeakers

CL 8 Ceiling Loudspeakers

$60.00

2-way passive full range ceiling loudspeaker that incorporates an 8" cone low frequency transducer and a ferrofluid cooled 1" soft dome high frequency unit with integral diffraction ring. The system's low frequency driver is mounted on a plastic support with mounting tabs for fixing to ceiling surfaces. The front of the system shall be covered with a perforated metal grille.

Two-way full range ceiling speaker

8 in. low frequency driver

Coaxial tweeter

Extended low frequency response

120 Watts Program Power

CL-8T Transformer Version

View Full Line of Ceiling Series Loudspeakers

Hi Res Image | Product Catalog | User Manual | Print Page

SPECIFICATIONS

Frequency Range (-10 dB) 50 Hz – 20 kHz

Program Power Capacity 120 W

On-Axis Sensitivity 1W/1 m 90 dB SPL

Cut Out Diameter 9.52 in.

Impedance 8 Ω

Weight 1.58 lbs

The 2-way passive full range ceiling loudspeaker shall incorporate an 8 inch cone low frequency transducer and a ferrofluid cooled 1 inch soft dome high frequency unit with integral diffraction ring. The low frequency voice coil shall be 1 inch in diameter. The high frequency voice coil shall be 0.5 inches in diameter.

The system specifications of a typical (transformer less) production unit shall be as follows: Average (RMS) power handling shall be 60W. Frequency range shall be of 50 Hz to 20 kHz. On-axis sensitivity (1W / 1m) shall be 90 dB SPL. Coverage angles shall be 90 degrees horizontal and vertical (average of 1/3rd octave bands from 500 to 8 kHz). Nominal impedance shall be 8 ohms.

The system’s low frequency driver shall be mounted on a plastic support that houses mounting tabs for fixing to ceiling surfaces. Colour shall be white. The front of the system shall be covered with a perforated metal grille.

The system shall be a D.A.S. CL-8.