Powered Systems

Passive Systems

Electronics

Accessories

Speakers

Drivers

Horns

Replacement Parts

Installations

Free Quote
Send us your
CAD Drawings or
Blueprints
of your project
Email or Snail Mail


DAS Audio Sound Systems



Previous Page
CL 6 Ceiling Loudspeakers  
CL 6 Ceiling Loudspeakers
$49.00

Add to Cart
2-way passive full range ceiling loudspeaker incorporating a 6.5" cone low frequency transducer and a ferrofluid cooled soft dome high frequency unit with integral diffraction ring. The system’s low frequency driver is mounted on a plastic support with mounting tabs for fixing to ceiling surfaces. The front of the system shall be covered with a perforated metal grille.
  • Two-way full range ceiling speaker
  • 6 in. low frequency driver
  • Coaxial tweeter
  • Extended frequency range
  • 80 Watts Program Power
  • CL-6T Transformer Version
  • CL-6TB Transformer Version with Backcan
  • View Full Line of Ceiling Series Loudspeakers
CL 6 High Res Image Hi Res Image | Ceiling Series Product Catalog Product Catalog | Ceiling Series User Manual User Manual | Print CL 6 PagePrint Page


SPECIFICATIONS
Frequency Range (-10 dB) 60 Hz – 20 kHz
Program Power Capacity 80 W
On-Axis Sensitivity 1W/1 m 90 dB SPL
Cut Out Diameter 7.76 in.
Impedance 8 Ω
Weight 2.61 lbs

The 2-way passive full range ceiling loudspeaker shall incorporate an 6.5 inch cone low frequency transducer and a ferrofluid cooled 1 inch soft dome high frequency unit with integral diffraction ring. The low frequency voice coil shall be 1 inch in diameter. The high frequency voice coil shall be 0.5 inches in diameter.

The system specifications of a typical production unit shall be as follows: Average (RMS) power handling shall be 40W. Frequency range shall be of 60 Hz to 20 kHz. On-axis sensitivity (1W / 1m) shall be 90 dB SPL. Coverage angles shall be 100 degrees horizontal and vertical (average of 1/3rd octave bands from 500 to 8 kHz). Nominal impedance shall be 8 ohms.

The system’s low frequency driver shall be mounted on a plastic support that houses mounting tabs for fixing to ceiling surfaces. Colour shall be white. The front of the system shall be covered with a perforated metal grille.

The system shall be a D.A.S. CL-6.