D.A.S. Audio Arco 4 Speaker System

Arco 4

Black

List Price$106
Our Price$85

White

List Price$106
Our Price$85

The Arco 4 incorporates a 4 in. woofer with weather resistant polypropylene cone. High frequency reproduction is handled by a 19 mm neodymium dome tweeter for brilliant highs. An Overload Safety Circuit protects the speakers from damage in case of overpowering.

Arco 4 Features:

4 in. woofer with weather resistant polypropylene cone

19 mm neodymium dome tweeter for brilliant highs

Overload Safety Circuit protects the speakers from damage

4 M6 rigging points

Safety cable attachement point

"T" versions are equipped with factory-installed multi-tap transformers

View Full Line of Arco Series Speaker Systems

Hi Res Image | Tech Data | Product Catalog | Print Page

SPECIFICATIONS

Frequency Range (-10 dB) 72 Hz- 22 kHz

Program Power Capacity 100 W

On-Axis Sensitivity 1 W / 1 m 86 dB SPL

Dispersion 90° H x 90 ° V

Impedance 8 Ω

Enclosure Material High Impact ABS Plastic

Dimensions (H x W x D) 8.7 x 5.5 x 5.5 in

Weight 3.5 lbs

This passive two-way system comprises a single four inch weather resistant polypropylene cone woofer and a 19 mm neodymium dome tweeter. All components are protected by a full-range protection system. It includes four M6 rigging points.

A typical production unit has the following specifications: Average (RMS) power handling (based on a two-hour test using a 6 dB crest factor pink noise signal bandlimited according to IEC standards) is rated at 50 W. On-axis (IEC) frequency range is 72 Hz to 22 kHz (-10 dB). On-axis sensitivity (1W / 1m) is 86 dB SPL. Coverage angles are 90 degrees horizontal and 90 degrees vertical (average one-third octave band of 500 Hz to 10 kHz). Nominal impedance is 8 ohms. The "T" version features a 100V multi-tap line transformer with 5, 10 and 15W settings, complying with IP-54 standards for outdoor use.

The enclosure is molded in high impact ABS plastic and is available in black or white. Its ultra-compact design and paintable surface ensure easy integration into any type of surroundings. The front is protected by a corrosion-resistant grille, lined inside with acoustically transparent speaker cloth. It includes an adjustable wall/ceiling support. Optional rigging accessories include: "U" ceiling or wall brackets and an accessory for configuring vertical arrays of up to six units or clusters of up to three loudspeakers.

The system shall be a D.A.S. ARCO 4 system.

RELATED ITEMS
	AXU-AC4 "U" bracket for wall/ceiling mounting of Arco 4, Arco 4T. Available in black or white $39.00
	AX-4RM Adjustable wall/ceiling mount included with Arco 4, Arco 4T, Arco 24 and Arco 24T
	AXA-AC Accessory for assembling arrays of Arco 4 and Arco 24 (Requires AXU mount) $29.00