Powered Systems

Passive Systems

Electronics

Accessories

Speakers

Drivers

Horns

Replacement Parts

Installations

Free Quote
Send us your
CAD Drawings or
Blueprints
of your project
Email or Snail Mail


DAS Audio Sound Systems



Previous Page
Aero 218 Sub Bass Subwoofer Line Array Speaker  
Aero 218Sub Subwoofer Line Array Speaker
$3,296.00

Add to Cart
The Aero 218Sub is high performance, subwoofer unit designed to provide low frequency reinforcement for the Aero 48. The front-loaded bass-reflex configuration and large enclosure volume offer a compelling bass response. Four rear casters and eight steel reinforced bar handles facilitate loading and unloading.

Two 18GN cone transducers handle low frequency reproduction. These high power loudspeakers use a 4" edge-wound flat wire (EFW) voice coil and lightweight neodymium magnet assembly. The speakers feature the T.A.F. cooling scheme which combines center pole piece, side slot and direct voice coil convection cooling for efficient heat evacuation.

The AERO-218 SUB is designed for applications where high sound pressure levels of extended low frequency response are needed. Events such as live concerts or large scale presentations will benefit from the AERO-21SUB. Aero 218 Sub High Res Image Hi Res Image | Aero 218 Sub Technical Data Sheet Tech Data | Aero 218A Related Items Related Items | Print Aero 218 Sub PagePrint Page


Installations:

Aero Success in New York
The 27th Colombian Independence Day Festival, organised by the Colombian Civic Center at Flushing Meadows-Corona Park, in Queens will certainly go down in history because this year non-other than the country’s leader himself took part. Alvaro Uribe Velez, President of Colombia, took the stage at the festival, celebrating the 197th anniversary of Colombian Independence and addressed the public with a positive and hopeful speech.  Read More...



SPECIFICATIONS
Frequency Range (-10 dB) 28 Hz – 85 Hz
Program Power Capacity 2800 W
On-Axis Sensitivity 1W/1 m 103 dB SPL
Impedance 4 Ω
Enclosure Material Birch Plywood
Dimensions (H x W x D) 39.8 in. x 26.8 in. x 32.4 in.
Weight 181 lbs

The bass system shall incorporate two 18 inch cone low frequency transducers. The frame of the low frequency speaker shall be manufactured of die-cast aluminium. The low frequency voice coil shall be 4 inches in diameter. All transducers shall use Neodymium magnets.

The system specifications of a typical production unit shall be as follows: AES power handling (based on a two hour test using a band-limited 6 dB crest factor pink noise signal) shall be 700W for the low frequency transducer, for a total system power of 1400W. Nominal on-axis frequency response shall be of 28 Hz to 83 Hz. On-axis sensitivity (1W / 1m) shall be 103 dB SPL. Nominal impedance shall be 4 ohms.

The system’s low frequency driver shall be mounted as direct radiator into a bass-reflex cabinet constructed of Wisa(R) plywood. It shall be finished with hardwearing catalyzed polyurethane paint. Four bar handles shall be provided. The front of the system shall be protected with a perforated steel grille, sealed against corrosion using a polyamide powder coat finish, and covered with acoustically transparent fabric.

The system shall be a D.A.S. AERO-218SUB.


RELATED ITEMS
Fun Compact 218Sub FUN-COMPACT-218SUB
Protective Transport Cover, Black.

$229.00

Add to Cart


Back to Top